Precor Experience Series Скачать руководство пользователя страница 52

Страница: 52 / 248

SYSTEM TESTS

MENU

TEST DESCRIPTION

SPM "Strides per Minute" test metrics:

Pulse: current pulse count.

Minimum: minimum pulse count.

Maximum: maximum pulse count.

CrossRamp Test

(EFX, AMT only)

menu:

System Tests > CrossRamp Test

Manually run the lift motor to raise/lower the crossramp through full
range, levels 1 to 20.

A/D

: Lift potentiometer analog to digital voltage value.

Glitches: number of sticking lift motion.

Volts (DC): lift motor voltage.

USB Test

menu:

System Tests

USB Test

List the active USB ports.

Touchscreen Test

menu:

System Tests

Touchscreen Test

Verify touchscreen display.

Touchscreen Cal-
ibration

menu:

System Tests

Touchscreen Calibration

Calibrates touchscreen finger press operation.

Backlight Test

menu:

System Tests

Backlight Test

Tests the display backlight performance.

RGB Test

menu:

System Tests

RGB Test

Tests the display color performance.

Numeric Backlight
Test

menu:

System Tests

Numeric Backlight Test

Tests the movement controls LCD numeric displays backlight
brightness level.

Numeric Display
Test

menu:

System Tests

Numeric Display Test

Tests the movement controls LCD numeric displays.

Heart Rate Test

menu:

System Tests

Heart Rate Test

Tests the handlebar unfiltered, filtered, and pulse heart rate. Grasp
the grips to test the hand held heart rate. Use a Polar heart rate sim-
ulator to test the wireless heart rate. Press the back button to exit
this test.

analog to digital converter

Contact Precor Customer Support at [email protected] or 800.786.8404 with
any questions.

Page 44

4 Standard Service Menus

Touchscreen Console Standard Service Menus

Содержание Experience Series

























































































































































































































































Результаты поиска

Содержание Experience Series

Отзывы:

Precor Experience Series, Руководство по обслуживанию, Страница: 52 / 248

Результаты поиска

Содержание Experience Series

Отзывы: