Precor Experience Series Скачать руководство пользователя страница 65

Страница: 65 / 248

1. Remove the left and right Drive Housing covers, see

"Drive Housing Covers Replace-

ment" on page 88

2. Measure and verify that the first stage drive belt tension is within specification, see

"First

Stage Drive Belt Tension Adjustment" on page 52

. If the belt tension is not within spe-

cification, re-tension the belt.

IMPORTANT

: Adjust the first stage drive belt tension prior to adjusting the second

stage drive belt tension.

3. Use a 1/2" socket to loosen the two Generator/Brake assembly bolt nuts (left side) just

enough to allow assembly movement. Do not remove the carriage bolt nuts.

CAUTION

: Make sure that the two Generator/Brake assembly carriage bolts are

loosened before adjusting the second stage belt tensioner. The tensioner hardware
can be damaged and the belt cannot be tensioned if the Generator/Brake assembly
are not loosened.

4. Place the belt tension gauge onto the Second Stage Drive Belt midway between the

Generator/Brake pulley and larger Step-up Assembly pulley and measure the tension.
Record the measured belt tension.

Contact Precor Customer Support at [email protected] or 800.786.8404 with
any questions.

Page 57

5 Adjustment/Calibration Procedures

Dual Stage Drive Belt Tension Adjustment Procedures

Содержание Experience Series

























































































































































































































































Результаты поиска

Содержание Experience Series

Отзывы:

Precor Experience Series, Руководство по обслуживанию, Страница: 65 / 248

Результаты поиска

Содержание Experience Series

Отзывы: