6. Reinstall the Ramp cover and use a short stub #3 screwdriver to secure the screw and
washer to the ramp. Do not over tighten the screw, torque to 30 in-lbs (3.4 Nm).
7. Use an approved cleaner (see
) to clean the left and right Stairarm
wheels. Dry with a clean cloth.
8. Reinstall the left and right Stairarm wheel trucks onto the Ramp tracks. To install, insert
the top of the wheels underneath the outer edge of the Ramp cover while lifting the bot-
tom of the wheels into the Ramp track. You may need to slightly lift up the outer edge of
the Ramp cover while inserting the wheels into the track.
Contact Precor Customer Support at [email protected] or 800.786.8404 with
any questions.
Page 177
6 Replacement Procedures
Ramp Replacement
