Installation Instructions
1. Reinstall the Moving Arm Pivot Shaft into the pivot shaft mounting bar.
2. Secure using new 3/16" hex key pivot shaft
inner
and
outer
, Nylock set screws, torque
to 300 in-lbs (34 Nm).
CAUTION
: Do not reuse the
inner
or
outer
Nylock patch set screws for installation.
Either removing or loosening the Nylock set screw will compromise the integrity of
the Nylock patch. Discard and order new set screws for installation (see
, bubble # 252).
1. Reattach the Linkarm to the Moving Arm:
a. Reinstall the Inner Linkarm cover onto the Moving Arm - Linkarm mount.
b. Then attach the Linkarm to the Moving Arm and secure using the 9/16" bolt,
Contact Precor Customer Support at [email protected] or 800.786.8404 with
any questions.
Page 145
6 Replacement Procedures
Moving Arms Replacement
