background image

page 33

C

O

M

M

E

R

C

I

A

L

 

P

R

O

D

U

C

T

S

 

D

I

V

I

S

I

O

N

KEYS ON THE DISPLAY CONSOLE

The following information explains the different uses of the keys on the keypad.
To locate each key, look at the display console or refer to Diagram 21.

INCLINE 

▲▼

▲▼

▲▼

▲▼

▲▼

:

 During a workout, the INCLINE 

▲▼

▲▼

▲▼

▲▼

▲▼

 keys let the user increase or

decrease the incline in 0.5 percent increments. The display can show a range from
0 percent to 15 percent.

When a user changes the incline by pressing the INCLINE 

 

or 

 

key, the number

that appears on the display shows the 

target incline (not necessarily, the present

incline) because the display can change much faster than the treadmill’s lift.

Note

: Anytime during a workout, the user can view the actual incline by lightly

touching either INCLINE 

 

or 

 

key. The percent of incline appears on the left of

the display. To change the incline, the user must hold the key down for more than
two seconds.

During Setup mode, the  INCLINE 

▲▼

▲▼

▲▼

▲▼

▲▼

 keys are used for data selection. Pressing

either 

 

or 

 

key does not affect the incline. However the 

 

or 

  

keys do affect

what appears on the display. Refer to 

Setup Mode and Prompts on page 29.

SELECT keys:

 During a program, the SELECT keys change what items appear

on the display. Refer to 

Changing the Display Features Using the Select Key on

page 35.

RESET:

 Provides access to diagnostics (see 

Club Information on page 23) and

lets the user access the WORKOUT SUMMARY display while in Pause mode. If
the user presses RESET again, he or she exits the WORKOUT SUMMARY and
returns to the Precor banner. Note that if the user presses RESET during the
Setup mode, he or she returns to the Precor banner.

Display console keypad.

Keypad 

keys

The keypad keys let the user:
• control your workout session,
• answer prompts prior to starting a
program,
• determine which display features appear,
• prematurely end a program, and
• adjust the incline and speed levels.

QUICKSTART

: When pressed at the

Precor banner, the running belt begins
moving after a three second delay.
SmartRate

®

 is inactive and default values

apply.

Diagram 21

Содержание C936i





















































Отзывы: