Large Display Temperature Meters
Instruction Manual
49
INSTALLATION
The overall dimensions for the Digital Temperature Meters are shown in:
Figure 40 on page 66 for PD755.
Figure 41 on page 66 for PD756.
Figure 42 on page 67 for PD757.
Wall Mounting Instructions
PD755 Mounting
There are four mounting holes on the base of the enclosure. They are used to
mount the instrument to a wall. The dimensions for the mounting holes are shown
in Figure 43 on page 67.
Procedure:
1. Drill holes into the wall to accommodate suitable fasteners.
2. Remove the front bezel from the housing by removing the four mounting
screws.
3. Align the enclosure mounting holes with the holes in the wall and insert the
fasteners. Tighten the fasteners (see the screw mounting in Figure 44 on
page 67).
PD756 Mounting
There are four mounting holes on the base of the enclosure. They are used to
mount the instrument to a wall. The dimensions for the mounting holes are shown
in Figure 45 on page 68.
Procedure:
1. Drill holes into the wall to accommodate the fasteners.
2. Align the enclosure mounting holes with the holes in the wall and insert the
fasteners. Tighten the fasteners.
PD757 Mounting
There are four mounting holes on the rear of the enclosure. They are used to
mount the instrument to a wall. The dimensions for the mounting holes are shown
in Figure 46 on page 68.
Procedure:
1. Drill holes into the wall to accommodate suitable fasteners.
2. Remove the front bezel from the housing by removing the four mounting
screws.
3. Align the enclosure mounting holes with the holes in the wall and insert the
fasteners. Tighten the fasteners.
