P
RO
V
U
PD6210 Analog Input Batch Controller Instruction Manual
11
Mounting Dimensions
Figure 2: Controller Dimensions - Side
View
Figure 3: Controller Dimensions - Top
View
Transmitter Supply Voltage Selection (P+, P-)
All controllers, including models equipped with the 12-24 VDC power option, are shipped from the
factory configured to provide 24 VDC power for the transmitter or sensor.
If the transmitter requires 5 or 10 VDC excitation, the internal jumper J4 must be configured
accordingly.
To access the voltage selection jumper:
1. Remove all the connectors.
2. Unscrew the back cover.
3. Slide the back cover about 1 inch.
4.
Configure the J4 jumper, located behind the
input signal connector, for the desired
excitation voltage as shown.
Figure 4: Transmitter Supply Voltage Selection
NO
NC
NC
C
NO
C
NO
NC
NC
C
NO
C
+
-
R
