PDW90 Point to Multi-Point Wireless Instruction Manual
22
4-20 mA Analog Outputs Module
Each
Analog Outputs
module has two 4-20 mA output channels. Each channel may be independently
programmed and mapped to remote analog inputs or Modbus registers. Once you have modified the
module’s settings, click the
Save Module Configuration
button to save these settings to the base station.
If you have made changes to the module that have not been saved and would like to load the saved set-
tings from the base station, click the
Read Settings from Hardware
button. If you would like to reset the
selected module to its default settings, click the
Load Default Settings
button.
The Monitoring area at the bottom may be used to view the current analog input reading or manually test
analog input operation.
Note: For information about
Modbus Access
, please see
Modbus Register Address vs Modbus Register
Number
on page 28.
www.
.com
1.800.561.8187
