快快快快
快快快快快
快快快快快快快
THE ESSENCE OF A
TR
UE
CONDENSER MICR
OPHONE
1" TR
UE-CONDENSER
MICR
OPHONE
FOR ALL APPLIC
A
TIONS
//
Getting started
1
Attach the LCT 40 SH shock mount to a stable, sturdy stand.
2
Place the LCT 449 PURE in the shock mount and secure it
by fastening the threaded nut. Make sure the Lewitt logo faces
the open side of the shock mount.
3
Connect the LCT 449 PURE via a standard 3-pin XLR cable to an
audio interface, microphone preamplifier or a mixing console
capable of providing 48 V phantom power (P48).
4
Turn phantom power on.
5
Set the input gain on your audio interface, mixing console,
preamp, etc. accordingly.
6
Use the supplied LCT 50 PSx pop filter when recording vocals and
spoken word to reduce unwanted plosives.
7
To ensure best sound quality, do not cover any part of the grille.
8
You are ready to go!
//
Box Content
//
LCT 449 PURE
//
LCT 40 SH, shock mount
//
LCT 50 PSx, magnetic pop filter
//
DTP 40 Lb, leatherette bag
//
Applications
Vocal recordings
//
Keep a short distance relative to the microphone (approx. 15 cm), this way the room acoustics are not overly
prominent and you receive a full sounding and dry vocal recording.
Miking guitar amps
//
To record a guitar or bass amplifier with your LCT 449 PURE, place it close to the speaker of your combo
or cabinet, directed slightly off-axis to the speaker.
Recording acoustic guitar
//
An easy and very common way to record acoustic guitar using only one microphone is to place it
20-30 cm away from the instrument, pointing towards the area where the neck and body meet.
Record drums
//
Use it to for snare, cymbals, overhead or to record room sound.
//
Please Note
//
Before switching off the microphone or disconnecting the cables, mute the volume of connected equipment.
//
Do not apply extensive force when disconnecting a cable, always pull on the connector and not on the cable itself.
//
Microphones which are not in use should not remain on the stand gathering dust or be unnecessarily exposed to humidity. Unmount it
from the shock mount and put it into the supplied DTP 40 Lb leatherette bag.
//
Do not attempt to modify or fix the microphone as it would void your product warranty.
//
The casing of the microphone can be cleaned easily using a wet cloth,
never use alcohol or another solvent for cleaning.
//
LCT 449 PURE
QUICKSTART GUIDE
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
All manuals and user guides at all-guides.com
all-guides.com
