PDW90 Point to Multi-Point Wireless Instruction Manual
34
Programming the Field Units with PDW Manager
The field units may also be programmed using the PC based
PDW Manager
. Field units connect to a PC
via the micro USB connection on their face, underneath the enclosure cover. Use of
PDW Manager
is re-
quired for programming advanced settings such as wireless encryption and analog signal calibration.
PDW Manager
can be found on the included CD or downloaded from
.
Once the software is running, power the unit using a 24 VDC power supply and connect the device to the
PC using the provided USB cable.
Note: Units must be powered externally prior to programming via USB.
The PC will automatically install the appropriate device drivers. Once this has completed, the device will
appear in the
Device
list at the top of the
PDW Manager
window. Click
Connect
.
The image below shows the available options on the
Configuration
tab while the field unit is connected.
The network ID, Modbus settings, and password may be configured from this tab.
PRI RSSI 10 RT
LINK OK
12/24 VDC
www.
.com
1.800.561.8187
