PDW90 Point to Multi-Point Wireless Instruction Manual
31
Field Unit Setup Menu
The setup menu consists of analog, digital (discrete), and Modbus
®
input/output settings, network ID,
password, and factory defaults restoration.
Display Functions & Messages
Shown below is a list of all display messaged in each field unit’s setup menu. This list is in order of ap-
pearance when pressing the
next
button. An indented line indicates a sub-menu or item.
Display
Action/Setting Description
NETWORK ID
Displays the point-to-multipoint wireless network ID (press
enter
to change)
01-99
The network ID can be any number between 01 and 99
MODBUS ADDRESS
The unique ID used by the base station to differentiate between field units
001-247
The Modbus address can be any number between 001 and 247
PASSWORD SETUP
Change the device password
PASSWORD (0=OFF)
Displays the current device password (press
enter
to change)
0000-9999
Password can be any number from 0001 to 9999 (0000 disables)
BACK TO SETUP MENU
Return to the setup menu
RESTORE DEFAULTS
Restore the unit to factory default settings
LOAD DEFAULTS?
Factory restoration confirmation prompt
NO
No, do not restore the device to factory defaults (press
enter
)
YES
Yes. restore the device to factory defaults (press
enter
)
LINK OK
016 RSSI 10 RT
NOW: 01
NETWORK ID
NOW: 016
MODBUS ADDRESS
SETUP
PASSWORD
DEFAULTS
RESTORE
Run Mode
SET: 01
NETWORK ID
increments selected digit.
selects next digit to the right.
NOW: 0000
PASSWORD (0=OFF)
SETUP MENU
BACK TO
SET: 0123
PASSWORD (0=OFF)
increments selected digit.
selects next digit to the right.
0000
disables the password.
NO
LOAD DEFAULTS?
YES
LOAD DEFAULTS?
Unit will load default
settings and reboots.
SET: 016
MODBUS ADDRESS
increments selected digit.
selects next digit to the right.
www.
.com
1.800.561.8187
