To fine-tune the operation of this mode, select the sensitivity. To do this, we
recommend lowering the balancer (or other gear) halfway or closer to the
bottom and select the sensitivity so that your tackle is confidently visible on
the screen.
Flasher mode is recommended for winter fishing, as in summer, there will
be more disturbing factors when working from a boat.
Depth Gauge
The Depth Gauge mode is intended not only for accurate depth
measurement, but also for displaying the diameter of the sonar beam spot at
the bottom (“trace” of the sonar). In this mode, sounding and signal processing
are significantly different from measuring depth in other sonar modes. Depth
measurement is especially
accurately performed in difficult conditions, such as
shallow water and overgrown ponds. No fish or other
information on the water column is displayed in Depth
Gauge mode.
The sensitivity, depth scale and other parameters of
the device are selected automatically depending on the
conditions in the water body. Deaf zone is always set to
0.5 m.
The diameter of the sonar spot at the bottom is
measured in meters below the base of the cone.
Screen view
in
Depth Gauge mode
1
