6
NT2-210018 Optical Spectrum
Analyzer User Guide
6176 E. Molloy Rd. East Syracuse, NY 13057 U.S.A. • [email protected] • 1-800-800-6652 • +1 315-431-7200 • www.ppc-online.com
A
BELDEN
BRAND
Optical Network
Solutions
Replace the batteries with only high quality AA NiMH batteries. Spare battery packs are available with a charging
unit for extended battery operation. If you install NiMH batteries that are dead or less than 1 volt each, charge these
batteries for one hour before using the OTDR. For proper maintenance, batteries require a monthly recharge.
Warning
To Prevent Fire or Shock Hazard:
• Do not install battery types other than those specified by the manufacturer
• Do not use the charger without the batteries installed
• Do not expose the battery charger to rain or excessive moisture
• Do not use the AC adapter when there are signs of damage to the enclosure or cord
• Ensure you are using the correct charger for the local line voltage
• Do not use any other charger than the one provided with this instrument
• Failure to follow these caution statements may void the warranty of this equipment
Section 6 - Physical Description
The Optical Spectrum Analyzer is packaged in a rugged aluminum housing which is further protected with
a rubberized boot. Although the front panel is weather resistant, care must be taken to avoid liquids and
contaminants around the fragile optical and electrical connectors, and the glass display. Use a mild cleaning agent
and damp soft cloth to clean the panels and the outside case. See the maintenance section for notes to clean the
optical connector. NEVER open the instrument for cleaning. Return to the factory for servicing if necessary.
Front Panel
Fig 6.1
