2
NT2-210018 Optical Spectrum
Analyzer User Guide
6176 E. Molloy Rd. East Syracuse, NY 13057 U.S.A. • [email protected] • 1-800-800-6652 • +1 315-431-7200 • www.ppc-online.com
Section 1 - Using This Manual
This manual contains information for the NT2-210018 Touch Screen Hand Held Optical Spectrum Analyzer. This
equipment is touchscreen capable and also has a hard keypad for operation. Note: there are a few operations only
accessible with touchscreen operation.
This user guide is written primarily using the touchscreen operation with occasional mention of the hard key
equivalents.
There are warnings, cautions and notes, as described below, displayed throughout this manual. Please follow all
warnings and cautions for your safety and the protection of the equipment.
Warning
• A warning alerts to situations that could cause personal injury.
Caution
• A caution alerts to situations that may cause damage to the equipment or produce poor testing
conditions, resulting in inaccurate test results.
Note
• A note is a special annotation that will assist the user with operational features.
Section 2 - Safety
Section 2 of this manual is a quick start guide. Prior to using the quick start guide or operating the equipment, it is
highly suggested the user reads all safety information first.
This product has been designed and tested in accordance with the manufacturer’s safety standards and has been
supplied in a safe condition.
Below are warnings that must be followed by the user to ensure safe operation and to maintain the product is in a
safe condition. Failure to follow these safety warnings, can result in damage to the instrument or harm to the user.
Warning
Personnel should always be aware when working with fiber optic test equipment that active fibers may
be present and therefore infrared optical energy may be present.
Warning
Never look directly into the end of a connected fiber optic cable or fiber optic adapter of test equipment, to do
so could expose the user to laser radiation and could result in severe personal injury.
Warning
To Prevent Fire or Shock Hazard:
• Do not install battery types other than those specified by the manufacturer
• Do not use the charger without the batteries installed
• Do not expose the battery charger to rain or excessive moisture
• Do not use the AC adapter when there are signs of damage to the enclosure or cord
• Ensure you are using the correct charger for the local line voltage
• Do not use any other charger than the one provided with this instrument
• Failure to follow these cautions may damage the equipment and void the warranty
A
BELDEN
BRAND
Optical Network
Solutions
