page no. 14 of 36
Vision Maxi
User Instructions Doc Ref M609 issue 1.0 June 2021.
2.5 Storage
Preliminary warnings
Stored in accordance with the applicable national
regulations.
Store the box in a closed environment protected from
atmospheric agents and isolate it from the floor using
planks or pallets.
Do not turn the packaging upside down.
Only place the appliance in a vertical position.
Store in a clean and dry place.
Specific warnings for R32
Store the unit in such a way as to avoid mechanical
damage.
Check the national/local legistation in force, regarding fire
regulations. The refrigerant contributes to the fire load.
(149 g R32).
2.6 Unpacking
Preliminary warnings
Check that no components were damaged during
transport.
Dispose of the packaging components following the
applicable waste disposal regulations.
Handle with care.
The equipment must always be handled vertically.
Check if there is refrigerant inside the package using an
electronic leak detector suitable for the system refrigerant.
If it is present, the refrigeration circuit is likely damaged. In
this case, do not install the appliance and call the Technical
Assistance Centre.
The packing material (cardboard, staples, plastic bags, etc.)
must not be dispersed or abandoned in the surrounding
environment and must be kept out of children reach, as it
can be dangerous.
Specific warnings for R32
Check that there are no sources of ignition in continuous
operation (open flames, gas appliances, electric stoves,
lighted cigarettes, etc.).
Using leak detectors with halogen lamps is prohibited.
Smoking in the vicinity of the appliance is prohibited.
Using a mobile phone near the appliance is prohibited.
Remove the package
1.
Polystyrene elements
1
Remove the packing:
– open the cardboard packaging
– remove the polystyrene elements
– remove the accompanying components
– remove the appliance from the box