page no. 6 of 36
Vision Maxi
User Instructions Doc Ref M609 issue 1.0 June 2021.
GENERAL
1.1 Symbols
The pictograms in the next chapter provide the necessary
information for correct, safe use of the machine in a rapid,
unmistakable way.
Editorial pictograms
User
• This indicates pages containing instructions or information
for the User.
Installer
• This indicates pages containing instructions or information
for the Installer.
Service
• This indicates pages containing instructions or information
for the Technical Service Centre.
Safety pictograms
Warning
• The operation described above presents a risk of physical
injury if not carried out in compliance with safety
regulations.
Dangerous electric voltage
• Signals to the personnel that the operation described
could cause electrocution if not performed according to
the safety rules.
Danger of very hot parts
• The concerned personnel is informed that the operation
described above presents a risk of burning due to contact
with hot components if not carried out in compliance
with safety regulations.
Prohibition
• Refers to prohibited actions.
Pictograms related to refrigerant R32
Symbols are used in some parts of the appliance:
Caution flammable material
• R32 refrigerant gas is slightly flammable and odourless.
Avoid proximity to sources of ignition in continuous
operation (open flames, gas appliances, electric stoves,
lighted cigarettes, etc.).
Instructions
• Read the instructions carefully before performing any
work on the appliance.
Instructions for Service
• The Technical Service Centre must read the instructions
carefully before performing any work on the appliance.
Instructions for the user
• Further information can be found in the technical
documentation of the appliance.
1.2 About the manual
This manual was written to provide all the explanations for
the correct management of the appliance.
Read this manual carefully before using the product and
keep the instructions with you so that you will always have
them available when needed.
the manual is divided into sections:
General information
It addresses all recipients.
It contains general information and important warnings that
should be known before installing and using the appliance.
Installation
It is addressed exclusively to the installer.
It contains specific warnings and all the information necessary
for positioning, mounting and connecting the appliance.
Commissioning, maintenance and troubleshooting
It addresses all recipients.
It contains specific warnings useful information for the most
common commissioning and routine maintenance.
Technical information
It addresses all recipients.
It contains detailed technical information about the
appliance.
