PowerTec 40Hp Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 68

PowerTec 40Hp Скачать руководство пользователя страница 15

9

Gear shift lever
Pulling the gear shift lever towards you puts
the engine in forward gear so that the boat
moves ahead. Pushing the lever away from
you puts the engine in reverse gear so that
the boat moves astern.

1. Forward “ r ”
2. Neutral “ f”
3. Reverse “n ”

Throttle grip
The throttle grip is on the tiller handle. Turn
the grip counterclockwise to increase speed
and clockwise to decrease speed.

Throttle indicator

The fuel consumption curve on the

throttle undicator shows the relative

amount of fuelconsumed for each

throttle position. Choose the setting that

offers the best performance and fuel

economy for the desired operation.

1. Throttle indicator

Throttle friction adjuster

A friction device provides adjustable

resistance to movement of the throttle

grip or the remote control lever, and

can be set according to operator prefer-

ence. To increase resistance, turn

the adjuster clockwise. To decrease

resistance, turn the adjuster counter-

clockwise.

Do not overtighten the friction adjuster.

If there is too much resistance, it could

be difficult to move throttle lever or grip,

which could result in an accident.

WARNING

Basic Components

«
...
13
14
15
16
17
...
»

Содержание 40Hp





































































Отзывы:

Нет отзывов