Powerhorse M1577110E, Руководство пользователя

Страница: 19 / 62

19
4. Thread the pump breather plug tube back into
the pump housing.
5. Align the arrow on the dipstick cap with the
arrow on the breather plug tube, insert it, and
twist it to secure. Reconnect the spark plug.
6. If oil level is low, use the following:
Model Oil Type
1577110
15771120
SAE 30 non-detergent pump
oil (#35605)
1. Replace fill cap.
Check/Add Engine Oil
Use the recommended oil type for your engine and
expected ambient conditions. (See “Engine
Manual” Section of this Owner's Manual for oil type
and capacity, and more detailed oil check/fill
instructions.)
WARNING: Burn Hazard
Never open oil port while engine is running. Hot oil can
spray over face and body.
Notes:

Engine is shipped without oil. You must add oil
before first use.
Add Fuel
WARNING: Fuel Fire/Explosion Hazard
Gasoline is highly flammable and explosive. Heat,
sparks, and flames can ignite fuel vapors, which can
become widespread during fueling. A flash fire
and/or explosion could result and cause serious
injury or death. Always use extreme care when
handling fuels. Carefully follow all instructions to
avoid the following conditions which could result in
fuel ignition:

gas vapor collection inside enclosures

static electric sparks

sparks from electric wiring, batteries, or running
engines

sources of heat (such as a hot engine exhaust)

open flames, including pilot lights
Always follow these general safety rules when
fueling:
1) Turn pressure washer off and allow to cool for at
least two minutes before removing any fuel cap.
Note: A running or still-hot engine is hot enough to
ignite fuel.
2) Fill fuel tank OUTDOORS – never indoors. Fuel
vapors can ignite if they collect inside and
enclosure and explosion can result.
3) Stay away from all sources of heat, sparks, and
flames. Do not smoke.
4) Never pump fuel directly into the gas tank at a
gas station – it could cause a static electric
spark. Follow these steps to avoid static electric
sparking during fueling:

Use an approved portable container to
transfer fuel to the pressure washer's tank. (A
portable container made of metal or
conductive plastic is preferred because it
dissipates charge to ground more readily.)

Always place container on the ground to be
filled. Never fill the portable gas container
while it is sitting inside a vehicle, trailer, trunk,
or pick-up truck bed.

Dissipate static charge from your body before
beginning the fueling process by touching a
grounded metal object at a safe distance from
fuel sources.

Keep nozzle in contact with container while
filling. Do not use a nozzle lock-open device.
5) Clean up fuel spills/splashes immediately.

If possible, move the pressure washer away
from spilled fuel on the ground.

Wipe up spilled fuel and wait 5 minutes for
excess fuel to evaporate before starting
engine.

Fuel soaked rags are flammable and should
be disposed of properly.

If fuel is spilled on your skin or clothes,
change clothes and wash skin immediately.