background image

17 

 

Operation

Follow Safety Rules for Operation 

After you have checked and fueled the equipment 
and positioned it in a suitable worksite, it is time to 
start your pressure washer.  The following are the 

procedures necessary for safe, successful operation 
of your pressure washer. 

 

WARNING 

Failure to follow safety rules may result in serious injury 
or death to the operator or bystanders. 

Instruct operators

. Owner must instruct all operators in 

safe set-up and operation. Do not allow anyone to 
operate the pressure washer who has not read the 
Owner’s Manual and been instructed on safe use 

practices.   

 

Safety equipment/controls

. Always operate with all 

safety covers, guards, and barriers in place and in good 

working order, and all controls properly adjusted for safe 
operation. 

 

Moving parts

. Keep hands, feet, hair and apparel away 

from moving parts. Air vents may cover moving parts 
and should be avoided as well. Never remove any 
guards while the unit is operating. 

 

Ear Protection.

 Hearing can be damaged from 

prolonged, close-range exposure to the type of noise 
produced by this pressure washer. The use of ear plugs 

or other hearing protection device is recommended for 
persons working within 15-20 feet of the running 
pressure washer for an extended period of time.  

Eye Protection. 

Wear ANSI/OSHA required “Z87.1” 

safety glasses when operating or servicing the

 

pressure 

washer.

 

Pressurized spray from this unit can cause 

severe injury to the eyes. Small objects can become 
airborne as the spray contacts them.  

 

NOTE! 

Before starting the pressure washer, review the 
following general safety rules for operation:  

 
 

 
 
 
 

 
 

Conditions for Use 

Know how to stop.

  Be thoroughly familiar with proper 

use of the equipment and all controls and connections.  

Know how to stop the pressure washer and 
depressurize system quickly if needed. 
 

Instruct all operators

. The pressure washer's owner 

must instruct all operators and potential renters in safe 
set-up and operation.  Do not allow anyone to operate 
the pressure washer who has not read the Owner's 
Manual and been instructed on its safe use.   

Adult control only.

  Only trained adults should set up 

and operate the pressure washer.  Do not let children 
operate.  Pressure washers can generate forces greater 
than children can control and require judgment beyond 

what can be expected of children. 

Under the influence.

  Never operate, or let anyone else 

operate, the pressure washer while fatigued or under 
the influence of alcohol, drugs, or medication. 

Safety equipment / controls in place.

  Do not operate 

the pressure washer unless all safety covers, guards, 
and barriers are in place and in good working order, and 
all controls are properly adjusted for safe operation.   

Damaged.

  Do not operate the pressure washer with 

damaged, missing, or broken parts.  Never attempt to 
repair a high pressure hose or component.  Always 
replace it with a part that is rated at or above the 

pressure rating of the machine. 

Modifications.

  Do not modify the pressure washer in 

any way or deactivate any safety device.  Do not change 
or add to fuel tank, fuel lines, or exhaust system. 

Modifications can result in hazards related to carbon 
monoxide poisoning, fuel leaks, fire, explosion or other 
serious safety hazards, and will also void the warranty.  

 

During Use 

Stay alert.

  Watch what you are doing at all times.  

Clear work area.

  Clear the work area of all bystanders.  

Keep children and pets away.

 

Keep spray away from electrical wiring

.  Spray 

contact with electrical wiring will likely result in severe 
electrical shock or electrocution. 

Hot exhaust/parts.

 Stay clear of engine exhaust.  

Never touch hot engine muffler, or other hot surfaces. 
All are very hot and will burn you.   

Never pull by hose.

  Do not move this machine by 

pulling on the hose.  Hose or connections could fail and 

Содержание M1577110E































































Отзывы: