background image

48 

 

Pre-Operation Inspection (cont’d) 

3.

 

Fuel and Fuel Tank 

 

Fuel 

 

Your engine is designed to use FRESH, UNLEADED GAS WITH AN OCTANE RATING OF 87 OR 

HIGHER.  

 

Unleaded gasoline is recommended because it produces fewer engine and spark plug deposits 
and extends the life of exhaust system components.  

 

Never use stale or contaminated gasoline or an oil/gasoline mixture. Avoid getting dirt, dust or 

water in the fuel tank.  

 

1.)

 

Remove the fuel filler cap and check fuel level. 

2.)

 

If the fuel level is too low, refuel the tank.  

3.)

 

Do not overfill.  

 

 

 
 
 
 

Gasoline Containing Alcohol 

If you decide to use gasoline containing alcohol (gasohol), be sure its octane rating is at least as high as that 
recommended by Powerhorse. There are two types of “gasohol”. One contains ethanol, the other contains 
methanol.  

 

 

DO NOT use gasohol that contains more than 10% ethanol.  

 

Do not use gasoline containing methanol (Methyl or Wood Alcohol) that does not also 

contain cosolvents and corrosion inhibitors for methanol.  

 

Never use gasoline containing more than 5% methanol, even if it has cosolvents and 
corrosion inhibitors.  

 
If “spark knock” or “pinging” occurs at a steady engine speed under normal load, change brands of 
gasoline. If spark knock or pinging persists, consult an authorized Powerhorse dealer. If this continues, it 
could result in engine damage.  

 
Fuel Tank Capacity: 208cc (3 Liters)  (0.79 Gallons) 
 
 

 

 

       

WARNING 

 

Gasoline is extremely flammable and is explosive under certain conditions. 

 

Refuel in a well-ventilated area with the engine stopped. Do not smoke or allow flames or 
sprats in the area where the engine is refueled or where gasoline is stored.    

 

Do not overfill the fuel tank (there should be no fuel in the filler neck). After refueling, make 

sure the tank cap is closed properly and securely.  

 

Be careful not to spill fuel when refueling. Spilled fuel or fuel vapor may ignite. If any fuel is 

spilled, make sure the area is dry before starting the engine. 

 

Avoid repeated or prolonged contact with skin or breaking of vapor.  

 

KEEP OUT OF REACH OF CHILDREN. 

Содержание M1577110E































































Отзывы: