PowerGuard 10KT, Руководство пользователя

Страница: 27 / 55

-
２３
-
6. Operation
6.1 Operation Mode
1. Turn on the UPS with utility power supplied (in Line mode)
1) After you make sure that the power supply connection is correct,
and then set the breaker of the battery pack in the
“
ON
”
position (this step only for long backup time model), after that
set the input breaker in the
“
ON
”
position. At this time the fan
rotates and the UPS supplies power to the load via the bypass.
The UPS operates in Bypass mode, the mode code is
“
01
”
.
2) To power on the UPS by simply pressing the ON button
continuously for more than 1 second, the buzzer will beep
once.
3) A few seconds later, the UPS turn into Line mode, and the
mode code is
“
02
”
. If the utility power is abnormal, the UPS will
operate in Battery mode without output interruption of the UPS.
2. Turn on the UPS with no utility power supplied (in Battery
mode)
1) After you make sure that the breaker of the battery pack is in
the
“
ON
”
position (this step only for long backup time model).
2) Press the ON button continuously for more than 1 second to
power on the UPS, and the buzzer will beep once, UPS
operates in No Output mode, the mode code is
“
00
”
.
3) A few seconds later, the UPS turn into Battery mode, and the
mode code is
“
03
”
.
3. Turn off the UPS with utility power supplied (in Line mode)
1) To turn off the inverter of the UPS by pressing the OFF button
continuously for more than 1 second, and the buzzer will beep
once. The UPS will turn into Bypass mode.