PowerGuard 10KT, Руководство пользователя

Страница: 15 / 55

-
１１
-
Indicates the UPS output is short and the UPS would
shut down
Indicates the load is over the SPEC range
Battery Information
Indicates the battery voltage value, which could be
displayed from 0 to 999Vdc
Indicates the battery capacitance percent, which could
be displayed from 0 to 199%
Indicates the battery is over charged, and the UPS
would be switched to Battery mode
Indicates the battery is weak, and the UPS would shut
down soon
Mode/Fault/Warning code Information
Indicates the operating mode of the UPS,
Mode/Fault/Warning code or the quantity of the parallel
system could be displayed, and the codes are
illuminated in detail in the following chapter
Inverter operating Information
Indicates the circuit of the inverter is working
Bypass operating Information
Indicates the circuit of Bypass is working
Output voltage and frequency and Bypass disable/enable selection
Information
The four value of the output voltage could be selected
when the UPS is in No Output mode or Bypass mode,
and only one of them could be actived in the same time
The two frequency value of the output voltage could be
selected when the UPS is in No Output mode or Bypass
mode, and only one of them could be actived in the
same time
Bypass disable or enable could be selected when the
UPS is in No Output mode or Bypass mode, and only
one of them could be actived in the same time
* Notes:
For 3C 10K-XL UPS, only the information of phase C will be shown; while
for 3C 15K-XL/20K-XL UPS, only the information of phase A will be shown.