PowerFleet V-AI12, Руководство пользователя

Страница: 11 / 73

Proprietary & Confidential support@powerfleet.com
Page 11 of 73
Hardwire the dashcam to the vehicle fuse box
To utilize the full features of the V-AI12 dashcam, including Standby mode, the dashcam must be
connected to a constant 12V or 24V minimum 2A power source using the supplied cables. You can do
this is by hardwiring the dashcam to the fuse that has a constant power source.
Warning
This installation should be performed by a qualified or professional person only. Working with your
vehicle's power system can be dangerous. Consult a professional for guidance.
Note
While in Standby mode, you can retrieve recordings from the dashcam. In Standby mode,
the dashcam draws a current of 34 mA.
When you are ready, follow these steps:
• Get organized
• Hardwire the dashcam
Get organized
To hardwire the camera to the fuse box, use the following equipment:
Note
The hardwire kit includes three wires:
• a wire for constant power
•
a black ground wire for a metal ground bolt
•
a red wire to connect the dashcam to power
These wires require a 24V power source.
Locate your fuse box
Check the owner's manual of the vehicle to find the fuse box, which may be located in different places
depending on the vehicle model. Remove the plastic panel to access the fuse box. Open the fuse box by
lifting a tab and pulling it toward you or with a trimming tool.