PowerBoss apex 47 g Скачать руководство пользователя страница 31

Страница: 31 / 64

4.5 Working with the Apex 47

The driver is requested to carefully
read this manual. All controls are mar-
ked with easy-to-understand symbols
that ease familiarization. First driving
attempts should be limited to clear
areas until you are familiar with all
controls and their functions.

Please comply with the fol-

lowing safety provisions:

When working with the

Apex 47 all safety measures

generally applicable for

handling vehicles have to

be observed. No passenger

transport is admitted with

the Apex 47. Warning and

instruction labels attached

to the machine contain im-

portant information about

safe operation and guaran-

tee your personal safety.

Before commencing work,

the operator has to make

sure that the machine and

its accessories are in proper

and safe condition and

comply with the provision

for safety at work. Do not

operate the Apex 4

without

protective devices.

4.5.1 Before Start of Engine

Open seat hood and check the follo-
wing:

- Engine oil level

- Visual check of the V-belts

- Fuel filling

- Open fuel cock (is located at a slot

of the air cleaner)

- Close seat hood

4.5.2 Start Engine

For safety reasons, the Apex 4

equipped with a seat contact switch.
Starting the engine is possible only
when the driver is seated.

- Switch all levers and switches to

neutral position. Actuate parking

brake.

- Actuate choke (with cold engine

only)

- Turn ignition key to switch on

ignition

- Continue turning ignition key clok-

kwise to start engine.

If the starting procedure has

to be repeated or if the engi-

ne stops, re-starting is pos-

sible only after ignition has

been turned off. The ignition

lock is equipped with a pro-

tection to preclude repeated

ignition with the engine run-

ning.

Operation

open

closed

4.5 Working with the Apex 49

Please comply with the fol-

lowing safety provisions:

When working with the

Apex 49 all safety measures

generally applicable for

handling vehicles have to

be observed. No passenger

transport is admitted with

the Apex 49. Warning and

instruction labels attached

to the machine contain im-

portant information about

safe operation and guaran-

tee your personal safety.

Before commencing work,

the operator has to make

sure that the machine and

its accessories are in proper

and safe condition and

comply with the provision

for safety at work. Do not

operate the Apex 49 without

protective devices.

4.5.1 Before Start of Engine

Open seat hood and check the follo-
wing:

- Engine oil level

- Visual check of the V-belts

- Fuel filling

- Open fuel cock (is located at a slot

of the air cleaner)

- Close seat hood

4.5.2 Start Engine

For safety reasons, the Apex 49 is
equipped with a seat contact switch.
Starting the engine is possible only
when the driver is seated.

- Switch all levers and switches to

neutral position. Actuate parking

brake.

- Actuate choke (with cold engine

only)

- Turn ignition key to switch on

ignition

- Continue turning ignition key clok-

kwise to start engine.

If the starting procedure has

to be repeated or if the engi-

ne stops, re-starting is pos-

sible only after ignition has

been turned off. The ignition

lock is equipped with a pro-

tection to preclude repeated

ignition with the engine run-

ning.

Operation

open

closed

Содержание apex 47 g

































































Результаты поиска

Содержание apex 47 g

Отзывы:

Похожие инструкции для apex 47 g

Бренды по названию

Популярные бренды

PowerBoss apex 47 g, Инструкция по эксплуатации

Результаты поиска

Содержание apex 47 g

Отзывы:

Похожие инструкции для apex 47 g

Бренды по названию

Популярные бренды