PowerBoss apex 47 g, Инструкция по эксплуатации

Страница: 41 / 64

41
Before checking:
Mark level surface for che-
cking broom adjustment by
chalk.
Check inflation pressure of
tyres (6bar).
- Secure machine by engaging par-
king brake.
- Lower cylinder broom and let it run
dry.
- Lift cylinder broom and forward the
Apex 4
7
a bit.
With the correct broom adjustment
the parallel sweeping marks have to
appear on the floor (sweeping
track).
The sweeping track width is to be
- 50mm with the Apex 4
7
G
- 50mm with the Apex 4
7
GH.
The sweeping track width can be
adjusted at the star-shaped knob (Fig.
16/2) as follows:
Broom adjustment
- Stop engine and pull key
- Engage parking brake
- Open seat hood
- Loosen handle (Fig. 16/3)
- Turn star-shaped knob (Fig. 16/1)
to the left = wider sweeping track
to the right = smaller sweeping track
- Fix handle (Fig. 16/3)
- Broom adjustment sticker (Fig. 16/2)
With one full turn of the
knob, the track widens or
broadens by approx. 10mm.
When exceeding the swee-
ping track width the cylin-
der broom wearing increa-
ses as well as the load of
the drive.
Fig. 17 Broom adjustment
sticker (in Fig. 16/2)
Maintenance/Service
Fig.16
Fig.17
41
Before checking:
Mark level surface for che-
cking broom adjustment by
chalk.
Check inflation pressure of
tyres (6bar).
- Secure machine by engaging par-
king brake.
- Lower cylinder broom and let it run
dry.
- Lift cylinder broom and forward the
Apex 49 a bit.
With the correct broom adjustment
the parallel sweeping marks have to
appear on the floor (sweeping
track).
The sweeping track width is to be
- 50mm with the Apex 49 G
- 50mm with the Apex 49 GH.
The sweeping track width can be
adjusted at the star-shaped knob (Fig.
16/2) as follows:
Broom adjustment
- Stop engine and pull key
- Engage parking brake
- Open seat hood
- Loosen handle (Fig. 16/3)
- Turn star-shaped knob (Fig. 16/1)
to the left = wider sweeping track
to the right = smaller sweeping track
- Fix handle (Fig. 16/3)
- Broom adjustment sticker (Fig. 16/2)
With one full turn of the
knob, the track widens or
broadens by approx. 10mm.
When exceeding the swee-
ping track width the cylin-
der broom wearing increa-
ses as well as the load of
the drive.
Fig. 17 Broom adjustment
sticker (in Fig. 16/2)
Maintenance/Service
Fig.16
Fig.17