background image

PowerBoss

 Made Simple Commercial Limited Warranty

PowerBoss

, Inc. warrants to the original purchaser/user that this product is free from defects in workmanship and materials under

normal use. 

PowerBoss

 will, at its option, repair or replace without charge, parts that fail under normal use and service when operated and

maintained in accordance with the applicable operation and instruction manuals.
All warranty claims must be submitted through and approved by factory authorized repair stations.
This warranty does not apply to normal wear, or to items whose life is dependent on their use and care, such as belts, cords,switches, hoses,
rubber parts, electrical motor components or adjustments. Parts not manufactured by are covered by and subject to the warranties and/or
guarantees of their manufacturers. Please contact 

PowerBoss

 for procedures in warranty claims against these manufacturers.

Special warning to purchaser

 -- Use of replacement filters and/or prefilters not manufactured by 

PowerBoss

 or its designated licensees, will void

all warranties expressed or implied.
A potential health hazard exists without original equipment replacement.
All warranted items become the sole property of 

PowerBoss

 or its original manufacturer, whichever the case may be. 

PowerBoss

disclaims any implied warranty, including the warranty of merchantability and the warranty of fitness for a particular purpose.

PowerBoss

 assumes no responsibility for any special, incidental orconsequential damages.

This limited warranty is applicable only in the U.S.A. and Canada, and is extended only to the original user/purchaser of this product. Customers
outside the U.S.A. and Canada should contact their local distributor for export warranty policies. 

PowerBoss

 is not responsible for costs or repairs

performed by persons other than those specifically authorized by

PowerBoss

. This warranty does not apply to damage from transportation,

alterations by unauthorized persons, misuse or abuse of the equipment, use of non-compatible chemicals, or damage to property, or loss of
income due to malfunctions of the product.

Minuteman

 Made Simple Commercial Limited Warranty

Minut

em

an

, Inc. warrants to the original purchaser/user that this product is free from defects in workmanship and materials under

normal use. 

Minut

em

an

 will, at its option, repair or replace without charge, parts that fail under normal use and service when operated and

maintained in accordance with the applicable operation and instruction manuals.
All warranty claims must be submitted through and approved by factory authorized repair stations.
This warranty does not apply to normal wear, or to items whose life is dependent on their use and care, such as belts, cords,switches, hoses,
rubber parts, electrical motor components or adjustments. Parts not manufactured by are covered by and subject to the warranties and/or
guarantees of their manufacturers. Please contact 

Minut

em

an

 for procedures in warranty claims against these manufacturers.

Special warning to purchaser

 -- Use of replacement filters and/or prefilters not manufactured by 

Minut

em

an

 or its designated licensees, will void

all warranties expressed or implied.
A potential health hazard exists without original equipment replacement.
All warranted items become the sole property of 

Minut

em

an

 or its original manufacturer, whichever the case may be. 

Minut

em

an

disclaims any implied warranty, including the warranty of merchantability and the warranty of fitness for a particular purpose.

Minut

em

an

 assumes no responsibility for any special, incidental orconsequential damages.

This limited warranty is applicable only in the U.S.A. and Canada, and is extended only to the original user/purchaser of this product. Customers
outside the U.S.A. and Canada should contact their local distributor for export warranty policies. 

Minut

em

an

 is not responsible for costs or repairs

performed by persons other than those specifically authorized by

Minut

em

an

. This warranty does not apply to damage from transportation,

alterations by unauthorized persons, misuse or abuse of the equipment, use of non-compatible chemicals, or damage to property, or loss of
income due to malfunctions of the product.

Содержание apex 47 g

































































Отзывы: