PowerBoss apex 47 g, Инструкция по эксплуатации

Страница: 29 / 64

29
Riding with the lifted hopper
reduces stability of the ma-
chine significantly. For this
reason, do not lift the hop-
per but just before empty-
ing. Before lifting the hop-
per, the operator has to
make sure that no persons
or objects are behind or
next to the machine. Stop
the machine on level
ground before lifting the
hopper.
When the hopper is lifted,
the operator has to ride the
machine slowly.
Keep clear of the hazard
zone!
Pinching and shearing ha-
zard. Provide for required
safe distance before lifting
or lowering the dirt hopper.
Apex 47 GH control panel
1 Release switch for lifted-up disposal
function
2 Dirt hopper, lift and lower
Proceed to emptying of the dirt
hopper as follows:
- Lift and switch off side brush and
cylinder broom
- Proceed to shaking of the filter
system
- Actuate switch (Fig. 10/1) and hold
(dirt hopper is released)
- Actuate switch (Fig. 10/2) by
pushing = lift dirt hopper
- Dirt hopper (Fig. 9/3) is lifted-out
- Back the Apex 47 GH until the dirt
hopper is positioned above the
container for disposal.
- Pull the safety knob (Fig. 11/1) of
the release lever (Fig. 11/2).
- Release swinging of the dirt hopper
by release lever (Fig. 11/2).
- Forward the Apex 47 GH after
emptying.
Operation
Fig.10
29
Riding with the lifted hopper
reduces stability of the ma-
chine significantly. For this
reason, do not lift the hop-
per but just before empty-
ing. Before lifting the hop-
per, the operator has to
make sure that no persons
or objects are behind or
next to the machine. Stop
the machine on level
ground before lifting the
hopper.
When the hopper is lifted,
the operator has to ride the
machine slowly.
Keep clear of the hazard
zone!
Pinching and shearing ha-
zard. Provide for required
safe distance before lifting
or lowering the dirt hopper.
Apex 49 GH control panel
1 Release switch for lifted-up disposal
function
2 Dirt hopper, lift and lower
Proceed to emptying of the dirt
hopper as follows:
- Lift and switch off side brush and
cylinder broom
- Proceed to shaking of the filter
system
- Actuate switch (Fig. 10/1) and hold
(dirt hopper is released)
- Actuate switch (Fig. 10/2) by
pushing = lift dirt hopper
- Dirt hopper (Fig. 9/3) is lifted-out
- Back the Apex 49 GH until the dirt
hopper is positioned above the
container for disposal.
- Pull the safety knob (Fig. 11/1) of
the release lever (Fig. 11/2).
- Release swinging of the dirt hopper
by release lever (Fig. 11/2).
- Forward the Apex 49 GH after
emptying.
Operation
Abb.10