PowerBoss apex 47 g, Инструкция по эксплуатации, Страница: 20 / 64

3.1.3 Check Engine Oil Level
- Engine oil has been filled in the fac-
tory.
- For safety reasons, check the engi-
ne oil level (refer to paragraph 6.9.2,
Fig. 23/2)
- In order to protect the engine, it is
switched off or cannot be started if
engine oil level is insufficient.
This function is controlled by a low
oil level switch (Fig. 0/1) at the engi-
ne. A red pilot lamp (Fig. 0/2) is situ-
ated at this switch and lights simul-
taneously in case of insufficient oil
level.
Before the machine is ope-
rable again, refill oil until
the prescribed level is attai-
ned.
low oil level switch
Use clean oil only for
refilling.
Do not use used oil.
Store oil in approved and
closed reservoirs only.
20
First Operation
Fig.0
3.1.3 Check Engine Oil Level
- Engine oil has been filled in the fac-
tory.
- For safety reasons, check the engi-
ne oil level (refer to paragraph 6.9.2,
Fig. 23/2)
- In order to protect the engine, it is
switched off or cannot be started if
engine oil level is insufficient.
This function is controlled by a low
oil level switch (Fig. 0/1) at the engi-
ne. A red pilot lamp (Fig. 0/2) is situ-
ated at this switch and lights simul-
taneously in case of insufficient oil
level.
Before the machine is ope-
rable again, refill oil until
the prescribed level is attai-
ned.
low oil level switch
Use clean oil only for
refilling.
Do not use used oil.
Store oil in approved and
closed reservoirs only.
20
First Operation
Fig.0