PowerBoss apex 47 g Скачать руководство пользователя страница 54

Страница: 54 / 64

6.11.4 Replace Hydraulic Pump V-Belt

- Turn engine off and pull key.

- Secure machine by engaging par-

king brake

- Open seat hood

- Loosen hexagon nuts (Fig. 29/6)

and remove together with belt guide

(Fig. 29/5)

- Detent V-belt (Fig. 29/7) with tensio-

ning roller lever (Fig. 29/19) and ta-

ke from the belt pulley

- Loosen tensioning roller (Fig. 29/2)

and detent the V-belt, and then re-

move.

- Unhinge tension spring (Fig. 29/17).

- Remove V-belt (Fig. 29/4).

Proceed in inverse order for mounting.

Maintenance/Service

6.11.4 Replace Hydraulic Pump V-Belt

- Turn engine off and pull key.

- Secure machine by engaging par-

king brake

- Open seat hood

- Loosen hexagon nuts (Fig. 29/6)

and remove together with belt guide

(Fig. 29/5)

- Detent V-belt (Fig. 29/7) with tensio-

ning roller lever (Fig. 29/19) and ta-

ke from the belt pulley

- Loosen tensioning roller (Fig. 29/2)

and detent the V-belt, and then re-

move.

- Unhinge tension spring (Fig. 29/17).

- Remove V-belt (Fig. 29/4).

Proceed in inverse order for mounting.

Maintenance/Service

Содержание apex 47 g

































































Результаты поиска

Содержание apex 47 g

Отзывы:

Похожие инструкции для apex 47 g

Бренды по названию

Популярные бренды

PowerBoss apex 47 g, Инструкция по эксплуатации

Результаты поиска

Содержание apex 47 g

Отзывы:

Похожие инструкции для apex 47 g

Бренды по названию

Популярные бренды