Power i-Cruise Dial, Инструкция по эксплуатации, Страница: 10 / 36

<IG power wire (white)>
Please connect with always 12V
line of the brake switch of the
brake pedal upper part, even if it
has extracted the key.
Grounding wire (black)
Please clench it with a screw,
which intent grounding wire of
body.
<Speed signal (blue)>
It is wiring required in order to
use an auto‑cruise function.
The position of the line which
connects is indicated for the
wiring diagram according to
vehicle type of an attached sheet.
Work procedure (Each wiring)
④ Please perform each wiring according to the following.
At the time of factory shipments, terminal (male) is connected to a power source wire
so that it can connect easily to the commercial harness for brakes.
When you do not use terminal, please cut, and connect with soldering.
Since an electro tap has loose connection's fear, please do not use it for a IG power
wire and a brake line by any means.
When you ground to metal fittings etc., please check that the metal fittings are being
fixed to a body.
It cannot ground by the metal fittings currently fixed to the plastic component etc.
Since the ground to the paint part of a body, etc. becomes the cause that operation is
poor, please avoid it.
black
Ground
It attaches with the bolt
currently fixed to the body etc.
Speed signal
blue
Speed signal
‑9‑
Main unit
The power supply terminal
of regular 12V which have
come out of commercial
option harness
white
Main unit
The brake line of regular 12V
white
tarminal is omitted and
it connects with soldering.
Do not use electro tap
Please set it by using soldering
or electro tap of attached.
Installation schematic view and an installation procedure
or
Main unit
Main unit
Stock ECU
Audio unit
Etc.
Brake Brake
Caution
Caution