Power One AURORA PVI-10.0/12.5-OUT-xx, Руководство по эксплуатации и установке

Страница: 52 / 82

Operation and installation manual Page 52 of 82
(PVI-10.0/12.5-OUTD-xx Rev:1.2)
11A)
Pin 1: instant value for the channel 1 input power
Pin 2: instant value for the channel 2 input power
When channels are connected in parallel, the previous page only indicates Pin, without
making the difference between input channels.
12A)
Riso: measured insulation leakage value. This parameter, unlike the other parameters
described so far, is not an instant reading; this measurement is only taken upon
inverter start-up.
Ileak: measured leakage current value.
13A)
If all previous steps are OK, the inverter specified this on display first line, together
with current date and time. In case of malfunction of the clock or other inverter parts
that are “not vital for inverter operation” (the unit can still produce power), the
problem will be displayed on display second line, instead of date and time.
The error messages can be as follows:
- CLOCK FAIL indicates clock fault, contact assistance
- BATTERY LOW battery flat
- CLOCK FAIL is displayed when unit is first switched on or after changing the
battery.
- FAN FAIL: contact the assistance
- MEMORY FAIL: Collected data are no longer stored. It is necessary to contact the
assistance for servicing.
Inverter OK
Wed 17 May 11 23
Riso 0.0 Mohm
Ileak 73 mA
Pin 1 0 W
Pin 2 0 W