Power One AURORA PVI-10.0/12.5-OUT-xx, Руководство по эксплуатации и установке

Страница: 50 / 82

Operation and installation manual Page 50 of 82
(PVI-10.0/12.5-OUTD-xx Rev:1.2)
1A) If the procedures explained under section 5.5.1 gave positive outcome, the system
continues with more check routines. The display will cycle through the following 13
pages, as described under
“GENERAL ISSUES ABOUT THE USE OF DISPLAY
KEYS”.
2A) indicates the inverter serial number and revision index of loaded firmware.
3A)
E-day: Daily quantity of energy produced.
$-day: Energy saved for the day. The value is expressed in the set currency.
4A)
E-tot: Total energy produced since installation
E-par
:
Partial energy produced since selected period
5A)
P-out: measured instant output power
On display second line is the highest temperature of the 2 values:
T-inv: inverter heatsink temperature
T-boost. Heatsink temperature
6A)
Ppk: peak power maximum value reached since “partial” function was activated
Ppk W
Ppk-Day ………...W
Type OUTD
PN------------
S/N--------- xxxxxx
FW rel. C.0.1.1
E-day 0 Wh
$-day 0.0 EUR
E-tot -------------
E-par 0 KWh
P-out 0 W
T-boost - °C