SpECifiCationS
Rated current:
1.5 A
Rated Voltage:
120 V
Rated Frequency (HZ):
60 Hz
Wheel no load speed:
6 300 RPM
Wheel diameter:
4"
*wheel must be guaranteed for a speed of 6,300 RPM or higher
important SafEty prECaUtionS
warnInG! read and understand all instructions before using this tool. Keep this
manual for the safety warnings and precautions, operating, inspection and maintenance
instructions. when using this tool, basic precautions should always be followed to reduce
the risk of personal injury and/or damage to the equipment.
wOrK area
1. Keep your work area clean and well lit.
Cluttered and dark areas invite accidents.
2. Operate in a safe work environment.
Do not use machines or power tools in damp or wet locations.
Do not expose to rain. Do not use power tools in the presence of flammable gases or liquids.
3. Keep children, bystanders and visitors away from the work area.
Do not let them handle tools or
extension cords. No one should be in the work area if they are not wearing suitable protective equipment.
4. store unused equipment.
When not in use, tools must be stored in a dry location to prevent rust.
Always lock up tools and keep them out of reach of children.
PersOnal safety
1. use eye and ear protection.
Always wear ANSI approved impact safety goggles. Wear a full face shield
if your work creates metal filings or wood chips. Wear an ANSI approved dust mask or respirator when
working around metal dusts. Wear ANSI approved earplugs.
2. Do not over reach; keep proper footing and balance at all times.
Proper footing and balance enables
better control of the tool in unexpected situations.
3. Dress properly, wear protective equipment.
Do not wear loose clothing or jewelry as they can be
caught in moving parts. Tie back long hair. Protective, electrically non-conductive clothes and non-skid
footwear are recommended when working.
4. stay alert, watch what you are doing and use your common sense.
Do not operate any machine or
tool when you are tired, under the influence of drugs, alcohol or medications.
5. use clamps or other practical ways to secure and support the work piece to a stable platform.
Holding the work piece by hand or against your body is unstable and may lead to loss of control.
tOOl use anD care
1. use the right tool for the job.
Do not attempt to force a small tool or attachment to do the work of a
larger industrial tool. The tool will perform better and safer at the task for which it was intended. Do not
modify this tool or use for a purpose for which it was not designed.
for any technical questions, please call 1-800-665-8685
2
8252165
Electric Chain
Saw Sharpener
Double insulated
