POWER ELECTRONICS
ETHERNET GATEWAY
ETHERNET GATEWAY CONFIGURATION
35
E
N
G
L
I
S
H
The MODBUS/RTU Slaves with node ID 10 and 21 is connected at the
MODBUS/RTU side of the gateway.
Figure 4.1 Connection example
Turn off the gateway
Switch on the jumper for configuration mode
Turn on the gateway (now the gateway will enter into
configuration mode).
Connect any MODBUS/RTU application with the 9600 BAUDS,
odd parity, 8 data bits and 1 stop bit.
The automatic
IP register “ETH_DHCP_ENABLE” [MODBUS
Address: 40922]
must be configured to “1” to enable dynamic
assignment.
Содержание GBC05CI
