Power Designers PowerCharge iHF3 series Скачать руководство пользователя страница 64 | Manualshive

Страница: 64 / 70

background image

MAN-230000-00 REV B

62

SOFTWARE LICENSE AGREEMENT

This license agreement is a legal agreement between Power Designers USA LLC of
Madison, Wisconsin, the author and licensor of the software, and the end user
licensee of the software.

Installation or other use of this software by the licensee constitutes agreement to all
terms and conditions of this license. In the event the licensee does not agree to all
terms and conditions of this agreement the software may not be installed or
otherwise used.

The following terms apply:

1.

Licensee may not redistribute any files, including but not limited to any setup or
installation files created by this software.

2.

Licensee may not disassemble or reverse engineer any part of this software.

3.

Licensee may not resell, rent or lease the software.

4.

Licensor owns all rights in the software including any incorporated images or text.

5.

Should the licensee fail to comply with any terms or conditions of this agreement
this agreement will immediately and automatically terminate without notice.

6.

The licensor of this software does not guarantee that this software is free from
bugs or free from viruses.

To the maximum extent permitted by applicable law, the software and
documentation are provided "as is" and the licensor disclaims all other warranties
and conditions, expressed or implied, including, but not limited to, implied warranties
of merchantability, fitness for a particular purpose, conformance with description, title
and non-infringement of third party rights.

To the maximum extent permitted by applicable law, in no event shall the licensor be
liable for any indirect, incidental, consequential, special or exemplary damages or
lost profits whatsoever (including, without limitation, damages for loss of business
profits, business interruption, loss of business information, or any other pecuniary
loss) arising out of the use or inability to use the software product, even if the
licensor has been advised of the possibility of such damages. In any case, the
licensors’ cumulative and entire liability to the licensee or any other party for any loss
or damages resulting from any claims, demands or actions arising out of or relating
to this agreement shall not exceed the purchase price paid for this license.

Should any term of these terms and conditions be declared void or unenforceable by
any court of competent jurisdiction, such declaration shall have no effect on the
remaining terms hereof.

«
...
62
63
64
65
66
...
»

Содержание PowerCharge iHF3 series







































































Отзывы:

Нет отзывов

Похожие инструкции для PowerCharge iHF3 series

Бренд: Keba Страницы: 35

Бренд: Facom Страницы: 42

Бренд: AccuPower Страницы: 2

X POWER EXCHANGE PXBC-004

Бренд: Ozito Страницы: 2

Бренд: MOB Страницы: 8

Бренд: Auto Meter Страницы: 11

Бренд: WARRIOR Страницы: 29

Бренд: Mafell Страницы: 25

Бренд: GoPro Страницы: 12

Бренд: Pro-Logix Страницы: 64

Mobile Charging Station

Бренд: Zagg Страницы: 18

Бренд: Sunoptic Technologies Страницы: 8

Бренд: LiitoKala Страницы: 3

Бренд: Ultralife Страницы: 15

Бренд: Cooper Страницы: 8

Бренд: Avery Dennison Страницы: 10

Бренд: GYS Страницы: 28

Бренд: CRX Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды