Power Computing PowerBase Low-Profile, Руководство пользователя

Страница: 212 / 240

Chapter 3: How To Use CDT Remote 183
Traditional audio CDs contain only audio tracks. Multimedia and Enhanced
audio CDs are not encoded in the same way as traditional audio CDs. They
contain digital data as well as audio tracks. On multimedia CDs, track 1 is
reserved for data. The audio tracks always start after track 1. If a player is not
equipped to handle multimedia CDs, it may try to play the data and could
cause speaker damage. Enhanced CDs, such as CD Extra and ActiveAu-
dio-type CDs, are two approaches to overcoming the track 1 limitation:
• CD Extra CDs have data stored at the end of the audio tracks, so the CD
player recognizes the disc as an audio CD.
• ActiveAudio-type CDs have data stored in the space before track
1—referred to as Track 0—so a CD player recognizes them as audio CDs.
For more information on Enhanced CDs, see Chapter 7 of the online CD-ROM Toolkit User
Guide
, Technical Information.
CDT Remote recognizes multimedia formatting and automatically skips
over the track 1 digital data when you click Play on the remote.
To play audio CDs:
1. For internal CD-ROM drives with internally connected speakers, verify
that Sound in the Control Panels folder is enabled.
2. Select CDT Remote™ from the Apple menu.
3. Load your audio CD into the CD-ROM drive.
4. Click Play on the remote.
CDT Remote skips track 1 of multimedia CDs. See Chapter 7, Techni-
cal Information
, for more information on CD formats.
Use Play Only Chosen Track to play a single track on a CD. It plays the
selected track and stops. It is available in the Player menu in the Menu bar.
1. Select Play Only Chosen Track from the Player menu in the Menu bar.
2. On your CDT Remote control:
a. Click Play to replay the same track.
b. Click Track to choose a different track.
NOTE