manualshive.com logo in svg

Power Computing PowerBase Low-Profile, Руководство пользователя

Поделиться
Скачать
Power Computing PowerBase Low-Profile Скачать руководство пользователя страница 102

 

Adding Memory

72

 

PowerCenter Pro User’s Guide

 

For Technical Support, Call 1-800-708-6227

 

CAUTION:

 

If an anti-static grounding strap was supplied with the RAM 

you are installing, put it on and ground it as directed by the instructions 
before touching any components inside the computer.

 

CAUTION:

 

Never turn the computer on or operate the computer with the 

cover removed.

 

How to remove the cover

 

1. Shut down the computer and turn off the monitor, but leave the 

computer plugged in to the electrical outlet.

 

Leaving the computer plugged in ensures that it is grounded.

 

2. If the monitor is on top of the computer, disconnect it if necessary, 

and set it aside.

3. Disconnect everything but the power cord from the back of the 

computer.

4. Rotate the computer so that its back panel faces you.

5. Remove the screws and the cover as follows:

 

If you have a Minitower chassis

 

1. Remove the four large thumb screws from the rear of the computer 

cover.

 

6 Add mem  Page 72  Friday, June 6, 1997  9:53 AM

Содержание PowerBase Low-Profile

















































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды