manualshive.com logo in svg

Power Computing PowerBase Low-Profile, Руководство пользователя

Поделиться
Скачать
Power Computing PowerBase Low-Profile Скачать руководство пользователя страница 186

 

156

Hard Disk ToolKit•

 

Personal Edition

 

 Reference Guide

 

Troubleshooting 

 

Stacker 1.x and 2.x

The FWB driver in this release is now compatible with Stacker 1.x and 2.x on systems using SCSI Manager 
4.3.1 (or later), but only on the main SCSI bus (i.e., the internal bus on dual bus systems, e.g., Quadra 950, 
Power Macintosh 8100, or the standard bus on other Macintoshes).

 

Table 1.

 

Troubleshooting

 

Problem/Question

Potential Cause

Solution

 

A device or volume won’t 
mount to the Desktop.

The device or volume might not have 
been set up to automatically mount to the 
Desktop.

Try using the FWB Mounter, available from the Apple menu, to 
mount the device.
If you’ve just formatted the device or created the volume, use 
HDT to change the volume’s attributes so that it mounts 
automatically to the Desktop.

If the device is a removable, it might not 
have a driver in memory.

If the device is an IDE device, make sure the FWB IDE 
extension is installed in the Extensions folder.
If the device is a SCSI device, make sure the FWB Tools 
extension is installed in the Extensions folder.

On drive of greater than 1 GB capacity, 
the driver partition must reside in the first 
1 GB of disk space, or Macintoshes earlier 
than the 840

 

AV

 

 cannot mount it.

Back up the data on the drive, then re-initialize the drive. Try 
installing the driver again.

I can’t format a device.

If you selected Quick Format, your device 
might need a lower level format.

Use HDT to perform a Low Level Format.

A small file occupies too 
much disk space.

Macintosh’s HFS determines the smallest 
allocation unit for files (that is, minimum 
file size) by the size of a volume; the 
larger a volume is, the larger the 
minimum size of a file will be. For 
example, if the minimum file size is 
500 KB, any file smaller than 500 KB will 
still take 500 KB of space in a volume.

When you create a new volume, the “Smallest File Size” field 
shows the minimum file size for the given volume size. To 
decrease the minimum file size, reduce the expandable size of 
the volume. For more information, see 

 

Creating New Volumes

 

 

in the online manual.
For information on allocation block size, see 

 

Partitioning

 

 in 

the online manual.

 

Table 5.

 

Compatibility Notes

 

Item

Description

 

7. HDT2 Troubleshooting  Page 156  Friday, June 6, 1997  3:12 PM

Содержание PowerBase Low-Profile

















































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды