Pottinger EUROCAT 272 Скачать руководство пользователя страница 16

Страница: 16 / 58

- 16 -

1500-GB EINSATZ 3672

OPERATION

Headstock

- Set the headstock horizontally. Changes can be made

with the mechanical or hydraulic lower link arm.

Lift-out cylinder

- The lift-out cylinder control unit is to be switched to

floating position during use to achieve correct adjustment
to soil

Cutting height

- Set the cutting height by turning the upper linkage

spindle (16) or with the hydraulic upper linkage. The
maximum slope of the mowing drums is 5°.

Protective covers

- All protective covers are to be kept closed and in good

condition

Reversing

Raise the mower when reversing!

Protective covers

Be advised!

All the protective devices are to be kept
and locked in the intended positions
during use!

Any damaged covers are to be replaced
before use!

The side guard and front guard can be folded up for cleaning
and maintenance work.
You need a tool (e.g. screw driver) to open the locking
device of the foldable protection devices.

Caution:

Even with the

hydraulic side

protection, you

must ensure that

the side pro-

tection is in the

intended position

and locked there.

EUROCAT 272 / 312

Opening side protection:

1. Open the locking device using a screwdriver. Insert

the screwdriver into the eyelet (1) and pull in the
indicated direction.

2. Swivel the side protection up manually.

Closing side protection: Fold down side protection. The

bolt locks automatically.

Opening front protection:

1. Loosen the locking device in the form of the eyebolts

left and right using a tool (knife wrench).

2. Swivel up front protection manually. The protection

locks in this position.

Содержание EUROCAT 272



























































Результаты поиска

Содержание EUROCAT 272

Отзывы:

Похожие инструкции для EUROCAT 272

Бренды по названию

Популярные бренды

Pottinger EUROCAT 272, Руководство оператора

Результаты поиска

Содержание EUROCAT 272

Отзывы:

Похожие инструкции для EUROCAT 272

Бренды по названию

Популярные бренды