Pottinger EUROCAT 272, Руководство оператора

Страница: 15 / 58

- 15 -
1500-GB EINSATZ 3672
GB OPERATION
Important notes prior to the start of work
Safety hints:
See Supplement A, pt. 1. - 7.)
After the first hours of operation
• Retighten all screw connections.
Safety advice
1. Check
- Check the condition of knives and the knife holder.
- Check mowing drums for damage (see chapter
"Maintenance").
2. Only switch the implement on in working
position and do not exceed the specified pto
speed (max. 1,000 rpm)!
An illustration, which is located near the gear, advises
which p.t.o. speed your mower unit is equipped for.
• Only switch on the pto drive when all the safety devices
(covers, aprons, panels, etc.) are in proper condition
and folded down.
3. Pay attention to correct p.t.o.
direction of rotation!
TD8/95/6
4. Prevent any damage!
The area to be mowed must be free
of obstacles or foreign objects. Such
objects (e.g. large stones, pieces of wood,
boundary stones, etc.) can damage the
mower unit.
In the event of a collision
• Stop immediately and switch off the drive.
• Carefully check the implement for damage. In particular
check the mowing drums and their drive shafts (4a).
• Have the implement checked also by a specialist
workshop if necessary.
After contact with a foreign object
• Check the condition of knives and the knife holder (see
chapter "Maintenance and service").
• Retighten all blade screw connections.
• Check the implement carefully for damages. You must
check in particular the mowing drums and their drive
shafts.
• Have the implement checked also by a specialist
workshop if necessary.
5. Remain at a distance when the engine is
running.
- Keep people out of the danger zone - foreign bodies
which can be ejected by the mower could injure them.
bsb 447 410
Special care is necessary on stony ground and near
roads and paths.
6. Wear hearing protection
The noise level in the workplace can
deviate from the measured value (see
Technical Data) partly because of
the differing cabin types of various
tractors.
• If a noise level of 85 dB (A) is reached or exceeded,
the farmer must have suitable hearing protection in
readiness (UVV 1.1 §2).
• If a noise level of 90 dB (A) is reached or exceeded,
the hearing protection must be worn (UVV 1.1 § 16).
Settings for operation
Set the lower link position to the right
1. Set the mowing unit in floating position with the help
of the single acting control unit
2. Move the hoist so long in the right direction, until the
arrow heads (1) of the lower link position indicator
on the relief cylinder point directly one to the other.
1
This setting presupposes a distance from the ground to
the right lower link pin of about 700 mm for EUROCAT
312 and about 650 mm for EUROCAT 272
5 4 0 U p m 1 0 0 0 U p m