Pottinger EUROCAT 272 Скачать руководство пользователя страница 3

Страница: 3 / 58

Dokument

GB-0600 Dokum D Anbaugeräte

PÖTTINGER Landtechnik GmbH
Industriegelände 1
A-4710 Grieskirchen
Tel. 07248 / 600 -0
Telefax 07248 / 600-2511

Machine checked according to delivery note. All attached parts removed. All safety equipment, drive shaft and operating

devices at hand.

Operation and maintenance of machine and/or implement according to operating instructions explained to the customer.

Tyres checked re. correct pressure.

Wheel nuts checked re. tightness.

Drive shaft cut to correct lenght.

*VYYLJ[WV^LY[HRLVɈZWLLKPUKPJH[LK

Fitting to tractor carried out: to three-point linkage

Trial run carried out and no defects found.

Functions explained during trial run.

Pivoting in transporting and operating position explained.

Information given re. optional extras.

Absolute need to read the operating manual indicated.

Please check.

According to the product liability please check the above mentioned items.

INSTRUCTIONS FOR
PRODUCT DELIVERY

In order to prove that the machine and the operating manual have been properly delivered, a confirmation is necessary.
For this purpose please do the following:
- sign

the

document A

and send it to the company Pöttinger or via the internet to www.poettinger.at

document B

stays with the specialist factory delivering the machine.

document C

stays with the customer.

Содержание EUROCAT 272



























































Результаты поиска

Содержание EUROCAT 272

Отзывы:

Похожие инструкции для EUROCAT 272

Бренды по названию

Популярные бренды

Pottinger EUROCAT 272, Руководство оператора

Результаты поиска

Содержание EUROCAT 272

Отзывы:

Похожие инструкции для EUROCAT 272

Бренды по названию

Популярные бренды