Pottinger EUROCAT 272, Руководство оператора

Страница: 12 / 58

- 12 -
1401_GB-ANBAU_3672
GB
ATTACHING TO TRACTOR
Check rotation direction
- The power take-off rotation direction is suitable when
the front view shows the outer mowing drums rotating
inward.
210-14-01
Checking the lighting
The lights and corresponding reflector
plates are to be check for function and
cleanness before any driving on public
roads.
5. Check supporting pressure
by lifting the cutter bar on one side. The weight should
be 50 kg at the inside and outside of the cutter bar.
517-10-07
50 kg
Note:
Be careful that the degree of soiling does
not influence ground pressure.
Note:
The hydraulic connection for the
hydraulic relief on the mower is fitted with
a stop valve. This is to be opened prior
to changing the preload pressure and
re-closed after changing the pressure!
Carry out trial run
Set ground distance of the right lower link
- Set the right lower link.
1. Set the mowing unit in floating position with the help
of the single acting control unit
2. Move the hoist so long in the right direction, until the
arrow heads of the indicator on the relief cylinder
point directly one to the other.
Set power take-off r.p.m.
- Set suitable power take-off r.p.m. on tractor
Note:
A decal placed near the gear offers
information about the rotation number
for which the disc mower is designed.