Pottinger EUROCAT 272 Скачать руководство пользователя страница 13

Страница: 13 / 58

- 13 -

1400_GB-TRANSPORT_3672

TRANSPORT AND WORKING POSITION

Safety hints:

See Attachment A1,

pt. 7.), 8c. - 8h.)

Changing from

working to

transport position

and vice versa is

only to be carried

out on even, firm

ground.

Never run the mow-

er in transport

position.

Changing from working position to field

transport position

Procedure:

Be advised!

Ensure that no one is standing in the
mower’s swivel range!

1) Raise the mower into field transport position using the

single-action control unit

Changing from field transport to

transport position

Procedure:

1) Turn drive off and wait for mower discs to come to a

standstill.

Be advised!

Ensure that no one is standing in the
mower’s swivel range!

2) Fold up side protection

for mechanical side protection:
1)  Release locking device with screwdriver
2)  Fold side protection up manually
  With hydraulic side protection (optional), the side

protection folds up automatically on performance
of points 3 and 4.

3) Pull control line

4) At the same time swivel the mower into transport position

using the dual-action control unit.

Note:

(with hydraulic lower link arm)

If the dual-action control unit is activated
without having pulled the control line, then
the horizontal position of the headstock
changes!

Содержание EUROCAT 272



























































Результаты поиска

Содержание EUROCAT 272

Отзывы:

Похожие инструкции для EUROCAT 272

Бренды по названию

Популярные бренды

Pottinger EUROCAT 272, Руководство оператора

Результаты поиска

Содержание EUROCAT 272

Отзывы:

Похожие инструкции для EUROCAT 272

Бренды по названию

Популярные бренды