Positron 3782651U/50, Руководство пользователя

Страница: 18 / 60

Insulator Tester Elements
14
The Electric field Probe uses two infrared
detectors to detect the position of the Switch
Actuator. Please refer to Figure 4. The two
infrared detectors are identified as IR1 and IR2.
The RS232 connector port is used to recharge
the Probe’s battery and to connect a Bluetooth
adapter for data transfer.
3.2 Probe Charger
The Probe’s battery is recharged using a 120Vac/220Vac universal wall charger connected to a
cable with a DB-9, RS232 female connector to connect to the Probe. A set of AC charger
adaptors is provided to accommodate various country standards. For charging the Probe in the
field, a
12Vdc auxiliary automotive charger cable terminated in a DB-9 connector is supplied to
recharge the battery from a car or truck.
Both the AC power charger and the automotive DC charger are equipped with an LED status to
report on the charging time. When first plugged in to charge, the LED will glow red. After 9
hours on charge, the LED will glow green, indicating that the charging time is completed.
The battery should be recharged overnight the day before a testing session. The battery charge
will last one day with the power switch in the ON position.
The battery can be recharged with the power switch in the ON or OFF position, however the
Probe will charge faster when switched off.
The data accumulated by the Probe must be transferred via Bluetooth to a Tablet/Laptop prior
to switching the Probe off or the data will be lost.
3.3 Universal Insulator Tester Hot Stick Attachments
The Universal Insulator Tester Probe has an
integrated hot-stick coupler. Additionally, in
the field Probe kit there is a universal adaptor
joint that enables total flexibility for
positioning the field Probe actuator against the
insulator. See Figures 5.
N
OTE
Figure 4
Model # 378265U1/x
Figure 5
Figure 5