Positron 3782651U/50, Руководство пользователя

Страница: 35 / 60

Using the Interactive Insulator Tester & Software
31
5.2 DURING Testing Sessions
It is important to disable the WIFI of the Tablet/Laptop to avoid long
operating system updates while performing a testing session.
Equipped with the Tablet separated from the keyboard, the Ground
Operator launches the Insulator Tester Software. Optionally, the
camera of the Tablet/Laptop can be used take a picture of the
tested tower.
To activate the Probe, remove the Power Switch Cover and move the power switch to the right,
toward the DB-9 connector, as shown in Figure
11. The Probe will first enter the Power-On Self-
Test ( POST ) as described in 5.1.5.1.
Ensure the slide switch on the Bluetooth adapter is in the DCE position. Insert the long range
Bluetooth Serial adapter into the DB-9 Serial port of the Insulator Tester Probe. The long range
Bluetooth Serial adapter is powered by the battery of the Probe.
Figure 11
ON
Ensure the slide switch on the
Bluetooth adapter is in the DCE
position.
Slide the Power Switch to the
right to the “ON” position, toward
the DB-9 connector
Location of Power Switch Cover
Locate Power Switch
Cover and remove