Positron 3782651U/50, Руководство пользователя

Страница: 36 / 60

Using the Interactive Insulator Tester & Software
32
Connect to the Probe prior to Tower Operator
ascension Ensuring that the Probe has been
switched
ON , select Connect to Probe and
reconnect to the same COM port noted in the
communications check performed prior to going out
in the field for a scanning session.
Select the appropriate COM Port, and Select ON.
It is recommended to connect the Bluetooth in the field prior to Tower Operator ascension. Use
the
Send Alert to Probe button in the field to check the communication link. The Probe will
respond with an annunciating tone.
With communication confirmed, the Tower Operator can now ascend. Once in position, the
Tower Operator should press the Probe’s button to ensure it is in
Awake Mode . If not, the
Ground Operator will be unable to signal the Probe. Ensure that the LED of the Probe is flashing
GREEN.