22
Assembling the Chair, continued...
STEP 9
Connect the Head Pillow to the Supplemental Back Pad by securing with zippers as
shown in Figure 9A, then secure this to the chair, by slipping the Head Pillow flap
under the loop located at the top/head of the chair as show in Figure 9B.
STEP 10
Connect the electrical connector for the USB Power Port as
shown in Figure 10. One end of the electrical connector will be
found on the right arm and the other end on the right side of the
base of the chair (near the seat). Ensure electrical connector is
fully snapped in.
ASSEMBLY
STEP 11
Install the remote control by finding the female portion of the connector
located on the end of the remote control’s cord, and securing it to the male
portion of the connector located on the base of the chair as shown in
Figure 11. Press the two parts together, then twist the circular metal
connector until connection is fully seeded.
Figure 9A
Supplemental
Backpad
Pillow
Head
Pillow
Figure 9B
