33
Starting a Massage
•
Ensure remote power is ON. The Power/Pause button will glow white.
•
Use the Remote navigation arrows to scroll through the menus. As you navigate the menus, the black highlight
indicates where the cursor is within the menu.
•
Once your desired selection is highlighted, press the OK button to activate the selection.
•
Upon activation, a blue dot will appear to the right of the currently running selection(s), and the upper section of
the remote screen will display the name of the massage(s) selected. The timer in the upper right corner indicates
estimated massage duration.
•
Choreographed massages that automatically combine the massage mechanism, air massage, and other features,
are offered in the Programmed & Focused menus (except in Full Body Air, which is an air massage only program).
•
Manual menu options activate a specific back mechanism function or set of functions.
•
Massages within the Manual Air menu are those that activate only the air cells.
Shoulder Scan & ScanSave
To experience a massage as intended, it is extremely important to define the shoulder position prior to the start of
a massage session. To ensure massage accuracy, please follow the steps below:
When the head pillow is properly placed...
•
The massage chair will Auto-Detect shoulder position.
•
Fine Tune Shoulder Position: Once Auto-Detect is complete, the remote will beep, the roller buttons glow white, and the
help text “Use roller buttons to fine tune shoulder position now” appears at the bottom of the screen. Roller position can
be adjusted by pressing and holding the Roller Up or Down arrows until the mechanism is located in the proper position
at the tops of the shoulder.
NOTE: Ensure you are not sitting on the bottom edge of the back pad. If this pad is too tight against the back, the shoulder scan
will not work properly.
When the head pillow is not properly placed OR not being used...
•
ScanSave remembers your body profile for all massages performed during the same power cycle. The chair will
only scan once while powered on, upon the first Programmed or Focused massage selection. If a second program is
selected the scan from the first program is remembered and used for the new selection. Anytime a new user enters
the chair, the remote, if it has been left on from a previous user, should be powered off and back on to ensure that
the new user is properly scanned.
NOTE: Fine Tune Shoulder Position lasts approximately 15 seconds before the shoulder position is stored and used for all
massage choreography.
NOTE: Shoulder scan detection does not occur when selecting Manual or Manual Air massages.
OPERATION & USE
