21
Assembling the Chair, continued...
STEP 8
Install the arms.
A. Unbox the right arm.
B. Lift the arm to align the arm’s connection points (upper hook,
and the two bolt holes on the base/bracket of the arm) as show
in Figure 8B.
C. Once aligned, carefully install the 2 screws to secure the arm to
the base as shown in Figure 8C. Ensure alignment is perfectly
accurate so you do not cross thread screws which will result in
stripped screws.
D. Connect the one electrical connector and the one airline from
the arm to the base of the chair as shown in Figure 8D. Ensure
that the electrical is fully snapped in, and that the airline is
pushed on as far as it will go.
E. Repeat Steps 8A-8D to install the left arm
Figure 8B
Figure 8C
Figure 8D
ASSEMBLY