Page 9
Please pull up the spacing plate which in the most left end and which show in
the upper picture. Next, take the plate insert to the noted corners of the spacing
plate into the 2 dents inside the paper roll compartment. After fixed the
spacing plate and checking the switch setting, this printer can start to use
58mm paper roll. Moreover when using 83 mm paper roll, simply remove the
Paper Spacing Plate and set up the DIP switch SW1 or software switch to 83
mm options and it able to work perfectly.
Wall Mount
When using the wall mount function
of Aura-9000, please notice that the
paper roll shaft hold has to
exchange position
according to the
wall mount direction. Please refer to
the following pictures and use flat
screw driver to remove the shaft
hold as arrowed in the picture.
Please exchange the right and the
left position and reassemble them.
INSTALLING DRIVER
There will be a Posiflex Product Information CD or DVD or a separate CD of
similar nature, which is specifically create for the Aura-9000U, Aura-9000W
and Aura-9000L. Please find the appropriate subfolder from the non-specific
Posiflex Product Information CD or DVD and please find the information
document such as “read me” or installation guide or application guide and
follow the instructions inside.
LAN and Wi-Fi PRINTER SPECIFIC ISSUES
Web Manager for Aura-9000L
The default static IP for the Aura-9000L is 192.168.192.168 and default listen
port is 9100. User may set his own IP to the same network segment and use
any browser to connect to the printer IP to configure the LAN setup of the
58 mm Compartment
Match Dents
